MG 1/100 Sinanju Titanium Finish leg joint

[knuckle88]

Hi there,hmm i have abit of a problem here okay let me get to the point i have the MG 1/100 Sinanju Titanium Finish i have finished assemble every part together and i encounter one problem the Joints on the Sinanju that connects the waist to the legs are so stiff that i can't move them at all,Anyone have any idea on how to solve this or at least have it some movement around that area. 

[Jack]

You could try a little sanding of the joints, (i.e. sanding holes bigger/sanding pegs smaller or if its a ball joint, sand the ball.) wouldn't hurt to try, but just be careful and don't over do it. That's just IMO, you might want to wait until some of the better modelers post on this.

[knuckle88]

Hey thanks for your thoughts on this issue,i'll wait for some more suggestion Thanks Again

[keithings]

I sometimes use veggie oil on joints that are stubborn or that just need a little lubing. Just a drop or less does great. Though be clean and careful with it, paint don't stick to areas that have been touched or have any resinue on it. Either that or locate some plastic safe oil from store. But the veggie oil is more available most likely. (being in almost every household). Hope it helps.